Comtrol RocketPort 485 Donanım Kurulumu - Sayfa 3

PCI Kart Comtrol RocketPort 485 için çevrimiçi göz atın veya pdf Donanım Kurulumu indirin. Comtrol RocketPort 485 8 sayfaları.

Sayfayı Yazdır

Note: RocketPort 485 can be installed in an ISA or EISA

slot. They are available on the Comtrol Software and

Documentation CD or at the Comtrol web site

ftp.comtrol.com/rport/eisa_cfg/directory.

7. Remove the slot cover.

Note: You may want to write down the model number

and serial number of the card before

installation.

8. Insert the card into the slot, seating it securely.

9. If using the Power feature, connect a hard drive-type

power supply cord in your computer to the power

connector on the card.

When enabling the Power feature, Pin 9 (DB9) or

Pin 22 (DB25) carries +5 V (±2%) at 0.5 amp.

Caution

10. Reinstall the expansion slot retaining screw.

Note: You may want to leave the system unit cover off until

the driver is installed and running, in case you need

to experiment with DIP switch settings.

11. Attach the interface that came with your card using

the appropriate procedure:

If installing a Quad/Octacable:

a. Attach the male end of the Quadcable or Octacable

to the card.

b. Tighten the retaining screws.

Note: Quad and Octacable models support RS-232

exclusively.

Go to Step 12 to complete the installation.

If installing a standard interface box:

a. Attach the interface box cable to the connector on

the RocketPort card mounting bracket.

a. Attach the male end of the RocketPort cable to the

card and the female end to the connector labeled

Host on the interface box.

b. Tighten the retaining screws.

12. Connect your peripheral devices.

13. Use the

software installation and configuration

documentation or device driver readme file to install

the driver to complete your installation.

Note: If installing on an EISA machine, you may need the

EISACFG files. They are available on the Comtrol

Software and Documentation CD or at the Comtrol

web site

ftp://ftp.comtrol.com/rport/eisa_cfg/

directory.

RocketPort® 485 Hardware Installation

RocketPort Interface Overview

ftp://

The RocketPort series provides several interface options:

•

Quadcable and Octacable fanout cables, which are

available with the following configurations:

Quadcable DB25 and DB9

Octacable DB25, DB9, and RJ45

Octacable

DB9

Note: The RJ45 cable is not displayed.

Note: RS-485 supports up to 32 multidrop.

•

Interface box

Quadcable

DB25

3 of 8