Aubade Creation RING 100 Manuel - Sayfa 5

Kişisel Bakım Ürünleri Aubade Creation RING 100 için çevrimiçi göz atın veya pdf Manuel indirin. Aubade Creation RING 100 10 sayfaları.

Sayfayı Yazdır

WARNING SYMBOLS

Read the instructions

carefully.

Class II. Double insulation.

This miroir cannot be

earthed.

IP44

Protection rating:

Protected against solid objects

greater than 1 mm.

Protected against splashing

water from all directions.

Compliance with European

Regulatory Requirements.

This product contains a light

source of energy efficiency

class "F"

The driver contained in this luminaire

should only be replaced by the manu-

facturer or his service agent or a person

of equivalent qualification. Danger of

2 3

NEW

0 V

electric shock.

The light source contained in this

luminaire may only be replaced by the

LED

manufacturer or his service agent or

a person of equivalent qualification.

Danger, risk of electric shock

LED

30000h

LED 220-240 V

CRI 80 - 4000 - 6500°K

GENERAL SAFETY INSTRUCTIONS

Read this user manual carefully before using the appliance, and keep it for future

reference and pass it on to a third party if necessary.

WARNING:

When using electrical appliances, comply with basic safety

precautions in order to reduce the risk of fire, electric shocks and personal injury.

If the external flexible cord of this luminaire is damaged, it must be replaced by the

manufacturer, or his after sale service, or any person of equivalent qualification

only to avoid any risk. The external flexible cord must only be replaced by a cord

having the same characteristic : H05VV-F 2 x 1 mm²

GENERAL INSTRUCTIONS

No-one, and in particular no child, must be in the vicinity of the workplace. Check that

the electrical specifications of this miroir are compatible with your installation.

WARNING:

- The power supply must be switched off before installation, maintenance or

cleaning. Remove the fuse or de-activate it, and make sure that it cannot be re-

activated.

- Before drilling a hole, make sure that there is no risk of drilling through an existing

non-visible cable or pipe.

The miroir must be installed by a qualified electrician in accordance with the

wiring standards in force in the country where the installation takes place.