Auber PT100M Kurulum Kılavuzu - Sayfa 3

Kontrolör Auber PT100M için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Auber PT100M 3 sayfaları.

Fig 3. Wiring for SSR output and RTD sensor. Red arrow points to RTD sensor. Green

arrows point to the SSR output connections. Blue arrow points to the steam thermostat.

Brew Water Temperature Setting

Part Number

PT100M

Table 1 lists default settings for the SV of the controller. Based on the discussions from forums,

the generally accepted setting for Silvia PID has been around 228-229 ºF for sensors mounted on

the top of boiler. The values in table 1 have been adjusted for the RTD sensor. We found the

temperature in the thermowell is about 2

the machine is equilibrated for 45 minutes or longer. Since SV can be easily changed, it will up

to the user to decide what the best temperature is for the espresso.

Recommend PID Parameters with PT100M sensor.

For the current model of SYL-1512, you can try the following setting.

SouF=1.0, P=3.0, I=100, D=40

SouF=1.0, P=3.3, I=183, D=45

SouF=1.0, P=4.0, I=200, D=50

Please note that these numbers only apply to RTD sensor. They are independent with the

temperature display unit. Either F or C will work.

Table 1.

Description

Rancilio Silvia

C (3.5

SV value in ºC

107

F) lower than that on the top of the boiler after

SV value in ºF

225