Auber Instruments WS-1211GPH Hızlı Kılavuz - Sayfa 9
Sıcaklık Kontrolörü Auber Instruments WS-1211GPH için çevrimiçi göz atın veya pdf Hızlı Kılavuz indirin. Auber Instruments WS-1211GPH 12 sayfaları. Programmable precision pid temperature controller
Sayfayı Yazdır
AS
AS
5.3
The third group of parameters is about the alarm setting with access code 188. Table 5
shows a list of the parameters, their range and initial set value when left the factory.
Table 5. List of control parameters and its initial settings under code 188.
Symbol
Display
AH
AH
AL
AL
ASt
ASt
sNote: Temperature alarms can be muted by pressing the "-" key. The Step Finish
Alarm cannot be muted; it can only be turned off by the ASt setting.
6. Save and recall recipes
This controller can save up to 8 pieces of smoking recipe (programs). Each recipe file can have
up to 6 steps (C-1 to C-6). For convenience, we have pre-named these 8 pieces of recipe files as
B1 (beef), B2, C1 (chicken), C2, F1 (fish), F2, P1 (pork), and P2. These recipe files are all the
same except their names, so you can store your special recipe to any of them. These recipes can
be stored in the memory of the controller even when it is powered off. You can overwrite the exist
recipe with a new one. For details on how to access these parameters, please check section
6 of the main instruction manual.
6.1 Save a recipe.
After a program has been entered, the user can save this current program as a recipe for future
use. Under the normal operating mode, press and hold SET key for 3 seconds until the Parameter
Window displays "LoCK". Release the SET. The display will show "0". Use "+" and "-" keys to
adjust the display to 2 and press SET. The display will show "SAVE" for a second and then the
value "End". If press SET key now, you will exit this mode without overwriting any existing
programs. Use "+" or "-" key to select the name of recipe to which you want to store the program.
If you press "+" (or "-" key) repeatedly, you will see "End", "b1", "b2", "C1", "C2", "F1", "F2", "P1",
"P2" one by one. Press the SET key again to store your current program under the selected recipe
name. This process will overwrite the current recipe data to the saved recipe data.
6.2 Recall a recipe.
WARNING: You current program will be overwritten by the selected recipe. Please write it down
somewhere if it is important to you.
Anti-short Cycle
Delay (only for cooling mode)
Description
Probe High Limit Alarm
Probe Low Limit Alarm
Step Finish Alarm
0-200
Range
-99-9999
-99-9999
on, off
9
6
Initial
290
0
on