Auber Instruments HD330-W Tamamlayıcı Kılavuz - Sayfa 4

Kontrolör Auber Instruments HD330-W için çevrimiçi göz atın veya pdf Tamamlayıcı Kılavuz indirin. Auber Instruments HD330-W 5 sayfaları. Wireless dual output programmable humidity controller

Sayfayı Yazdır
AUBER INSTRUMENTS
Figure 11. Press the configuration button to go to settings or preferences.
A.
Settings
These parameters, which can also be accessed from the device, are
relevant to how the device should operate. All parameters and program
settings of the device can be changed from the app and are synchronized
to the device. Settings are password protected, but users can change
password to any personal 3-digit code. Users can also choose to save
the code to avoid entering the code every time they try to access the
parameter settings.
B.
Preferences
These additional settings are only available on AuberSmart app, not on
the device itself.
1
2
3
4
5
Figure 12. Preferences setting page.
1)
Device Alias. Users can rename the device in order to differentiate it
from other devices.
2)
Lock Device. This setting determines whether a new user can find and
add this device to his/her AuberSmart app. When this feature is turned
on, other users of AuberSmart App won't be able to connect to the
2021.06
A
B
1
2
5
device. But users that have already established the connection won't
be affected. By default, this feature is set to "off".
3)
Sticky On Top (not available for iOS). When this feature is set to "on",
this device will stay on top of the device list.
4)
Export Data. Humidity data recorded on the device can be downloaded
as a CSV file on user's phone or tablet.
5)
Delete Device. By tapping on this button, users can remove this device
from AuberSmart app.
5. FAQs (regarding wireless connection)
1)
Can I add more than one HD220-W to AuberSmart app?
Yes. You can add multiple devices to AuberSmart app. For example, if
you have two devices under the coverage of the same wireless network,
you have the ability to add both devices to your AuberSmart at the same
time.
2)
Can multiple smart phones or tablets connect to the same device?
Yes. A device (HD220-W) can connect with more than one smart phone
or tablet.
3)
How can I prevent other AuberSmart app users from adding my device?
First of all, the other user must know your Wi-Fi password in order to add
the device. Secondly, you can choose to "Lock" the device so new users
won't be able to add the device even if they has the Wi-Fi password.
Please note that this "Lock Device" feature won't block users that are
already connected with the device.
4)
How can I prevent other users from changing my settings on the device?
The parameter settings and app preferences are password protected.
Users who do not know the password won't be able to access the
parameter or preference settings. However, changing parameter settings
from the device itself doesn't require password.
5)
My device picked up other people's wireless signal instead of mine.
The device automatically picks up the strongest Wi-Fi signal around it.
You can manually input the Wi-Fi signal's name (SSID). Or you can move
the device to a location that is closer to your Wi-Fi router during the initial
set up. Once the connection is established, you can move the device
back to where it was as long as it is under the coverage of the same
Wi-Fi signal.
6)
Can I access the device info without Wi-Fi network?
Once your phone/tablet has successfully connected with the device, you
can access the device via cellular signal.
7)
Can I access the device info from a Wi-Fi network that is different from
my home Wi-Fi network?
If you are connecting the device for the first time, your phone/tablet and
the device must be under the coverage of the same Wi-Fi network. Once
your phone/tablet has successfully connected with the device, you can
access the device from a different Wi-Fi network as long as it has internet
access.
8)
I can see and access the device from AuberSmart app when I was home,
but when I was away from home I cannot connect to it.
Please try 1) delete the device from the app, 2) reset the Wi-Fi module by
holding the SET and Mute key, and 3) add the device again.
WWW.AUBERINS.COM
P4/5