Auber Instruments WS Series Kullanım ve Talimat Kılavuzu - Sayfa 3
Kontrolör Auber Instruments WS Series için çevrimiçi göz atın veya pdf Kullanım ve Talimat Kılavuzu indirin. Auber Instruments WS Series 18 sayfaları. Programmable pid temperature controller with dual probe
Ayrıca Auber Instruments WS Series için: Hızlı Kılavuz (15 sayfalar), Hızlı Kılavuz (14 sayfalar), Kullanım ve Talimat Kılavuzu (18 sayfalar), Hızlı Kılavuz (14 sayfalar)
Sayfayı Yazdır
Operating Instructions
1) Description of the controller.
Figure 1. Front Panel
(1) Parameter Window (LED) - For displaying temperature values and controller's
system parameters.
(2) Output status indicator - In normal mode, this LED indicates the heater status.
When it is on (lit), the heater is powered. When it is off, the heater power is off. When
it is flashing, it means the heater is on and off intermittently to reduce the power
output. It should be synchronized with the power light on the cooking device.
(3) SET Key - For showing current temperature settings, entering parameters setting
mode and confirming various actions taken.
(4) "+" Key - To increment displayed value.
(5) "-"Key - To decrement displayed value.
(6) Time Key - Change the Parameter Window between current timer and
temperature values, when pressed.
(7) Alarm indicator - Lit when the alarm is on.
(8) Timer status indicator - In normal mode, when "(8)" is on and "(9)" is flashing,
LED shows the time passed since it's powered on.
(9) Mode indicator - the small "dot" is used to indicate what mode the controller is in.
3