AIRTRONICS SD-10G Aero Hızlı Kurulum Kılavuzu - Sayfa 5
Oyuncak AIRTRONICS SD-10G Aero için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. AIRTRONICS SD-10G Aero 8 sayfaları. 2.4ghz fhss-3 radio control system
Ayrıca AIRTRONICS SD-10G Aero için: Manuel (16 sayfalar), Hızlı Başlangıç Kılavuzu (5 sayfalar)
Sayfayı Yazdır
section 2: naMinG YoUr Model
After saving your Model Type selection options, it's time to name your model. The Model Name function allows you to name each
of your individual models. This makes it easy to keep track of multiple models. When you select a model, all of the programming
for that model is loaded. The Model Name can consist of up to 8 letters, numbers, or symbols. Choose from capital letters, lower
case letters, numbers, and various symbols.
For more detailed information about using the Model Name function, see the following section in your SD-10G User's Guide:
Model Naming ...................................................................................Page 30
To name your model, follow the steps below:
1) With the transmitter turned 'ON', navigate to the SYSTEM>MODEL NAME menu.
2) Press the Navigation Pad 3456 to highlight a character, then press the ENTER key to select the highlighted character.
That character will be displayed and the underline will move to the next space.
3) Repeat step 2 to enter the rest of the characters. Up to eight characters can be entered. The name of your model will
be displayed near the top of the screen (i.e. 01:Xtra300S).
section 3: BindinG tHe transMitter and receiver
After saving your Model Type selection options and naming your model, it's time to bind the transmitter and receiver. When new,
it is necessary to pair the transmitter and receiver to prevent interference from transmitters operated by other users. This operation is
referred to as 'binding'. Once the binding process is complete, the setting is remembered even when the transmitter and receiver
are turned 'OFF', therefore, this procedure usually only needs to be done once.
For more detailed information about binding the transmitter and receiver, including changing the Modulation Type and using the
Safety Link feature with FHSS-3 receivers, see the following sections in your SD-10G User's Guide:
Changing Modulation Type.........................................................Page 34
Safety Link ............................................................................................Page 34
Binding ...................................................................................................Page 35
The Safety Link function is used to program a unique bind code to each receiver/model pair, preventing the transmitter from
controlling a model that it's not currently programmed for. This feature is only supported when used with FHSS-3 receivers.
To bind your transmitter and receiver, follow the steps below:
1) Turn the transmitter 'ON' and navigate to the SYSTEM>MODULATION menu.
2) Highlight the MODULATION option, then press the YES/+ or NO/- keys to choose the desired Modulation Type. If you're
using an Airtronics FHSS-3 receiver, such as the 92104 10-Channel receiver, choose FH3. If you're using an Airtronics
FHSS-1 receiver, such as the 92674 7-Channel receiver, choose FH1.
3) Hold down the Bind Button on the receiver. While holding down the Bind Button on the receiver, turn the receiver 'ON'.
4) Release the Bind Button on the receiver. The Bind LED will slowly blink.
5) Scroll down to TRANSMIT BIND CODE, then press the YES/+ key. The Bind LED on the receiver will blink rapidly.
6) After the Bind LED on the receiver stops blinking rapidly, press the END key. The Bind LED will turn solid, indicating that
the transmitter and receiver are now paired and the binding process is complete.
section 4: receiver connections and MoUntinG
After naming your model, you can now plug your servos, receiver battery and switch harness into the receiver, then mount your
receiver into your model and route the antenna wires.
For more detailed information about connecting your airborne components to the receiver, see the following section in your SD-10G
User's Guide:
Airborne System Connections ...................................................Page 20
Email: [email protected]
|
Website: www.airtronics.net
| Phone: (714) 963-0329
5