Comway WG8010 Hızlı Kurulum Kılavuzu - Sayfa 3
Modem Comway WG8010 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Comway WG8010 7 sayfaları. Cellular ip modem
Ayrıca Comway WG8010 için: Kullanıcı Kılavuzu (18 sayfalar)
Sayfayı YazdırWG8010 cellular IP modem Quick Installation Guide
beside
Step 5． Plug in the USB-to-Serial converter. The window should change to show the
USB-to-Serial converter installed.
Step 6． Most devices will show the Com port next to the device name. Record this number.
Note: Make sure there is no "!" or "X" next to the USB device. If you see an "!" or an
"X," the device is not properly installed and will not work.
2.2 Start HyperTerminal
Step 1． Connect the WG8010 IP Modem to the PC COM port and run HyperTerminal
software. From the Taskbar, click [Start], followed by "All Programs" →Accessories
→Communications → "HyperTerminal".
Step 2． You will be prompted to enter a description for the new connection. Enter a name for
the connection (e.g. "WG8010 IP Modem") and click [OK] to continue.
Step 3． In the "Connect to" dialog box, select the PC COM port number, which is connected
to the modem, and click [OK] to continue.
Page 3 of 7