2bfirst Cadillock Alarm Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 9

Araba Alarmı 2bfirst Cadillock Alarm için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. 2bfirst Cadillock Alarm 20 sayfaları.

Sayfayı Yazdır

SAFETY INFORMATION:

We recommend tightening the screw during every inspection but at

least 1-2 times per year, since severe shocks may result in a loosen-

ing of the safety screw in exceptional cases.

PLEASE OBSERVE:

The safety screw is an important safety feature of the Cadillock

Alarm. To prevent the Cadillock

Alarm from being disassembled

during an attempted theft, the cable of the Cadillock

Alarm is

attached with the enclosed safety screw. It is nearly impossible to

remove the Cadillock

Alarm without the enclosed Allen wrench. The

safety screw as well as the Allen wrench are fabricated exclusively

for the Cadillock

line in various designs. Therefore please always

store the Allen wrench in a safe location.

If you often take your vehicle a considerable distance from your

main residence, we recommend taking the Allen wrench with you in

your luggage so that you will be able to remove the Cadillock

Alarm

in the event that your car battery has any technical fault.

Since an unexpected failure of the car battery may lead to inconven-

iences for the user if the Allen wrench is not immediately available,

the performance capacity of the car battery should be monitored

at regular intervals when the vehicle is protected against theft by

the Cadillock

Alarm. For this purpose, 2bfirst technologies, as

a licensing partner of ADAC, offers the ADAC-Battwatch

(www.battwatch.com).

Step 4: Attaching the negative cable again

Place the negative cable of the car battery that was removed in the

first step back on the negative pole, place the black U clip ground

cable of the Cadillock

Alarm between the screw connections and

then tighten the screws of the negative cable again securely.