Conair Weight Watchers WW35C Kullanım Kılavuzu - Sayfa 4
Terazi Conair Weight Watchers WW35C için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Conair Weight Watchers WW35C 8 sayfaları. Weight watchers bathroom scale
again. The scale is now ready for you to weigh yourself and to
determine percentage of body fat.
Using Your Weight Watchers
Precautions for Use
CAUTION! Use of this device by persons with any electrical implant such
as a heart pacemaker, or by pregnant women, is not recommended.
1. Tap center of scale platform with foot to activate digital display (display
will flash).
2. Wait for "0.0" to appear in display window.
3. Firmly press the USER button located below the display several times
until your user number appears. Note: The scale will automatically scroll
through your customized data, then 0.0 will be displayed.
4. Step onto the scale BAREFOOT, making sure the balls of your feet cover
both metal plates.
5. Weight will be displayed for 3 seconds. Remain on scale without moving!
6. Display will then flash "bf", followed by your body fat percentage.
Using The Weight-Only Mode
For weight-only mode, no personal data entry is necessary
1. Place scale on a flat, level surface.
2. Tap center of scale platform with foot to activate (display will flash).
3. Wait for "0.0" to appear in display window.
4. Step onto scale. Weight measurement will appear in display window.
Facts You Should Know
Your Weight Watchers scale is a precise measuring instrument that is most
accurate when weighing a stationary object. To ensure the most accurate
readings for 99% of your total body weight, always try to stand on the
same area of the scale platform and DO NOT MOVE. Should the weight
on the scale exceed the scale's capacity, you may see an error message
"ERR".
Electronic sensors are sensitive. Be careful not to drop or jar the scale.
Place it
gently onto floor surface, and store where it will be protected from
impact. The scale is an electronic instrument and should never be sub-
merged in water. Clean with damp cloth and/or glass cleaner.
In the unlikely event that the scale battery malfunctions and needs to be
replaced, lift the snap on battery cover on the bottom of the scale and
replace the old
battery with a 3V Lithium battery (CR2032).
Dispose of the old battery properly. Do not attempt to open the
scale or to remove any components. Servicing should be done by
qualified technicians only. See warranty information below.
®
Body Fat Monitor