Conair FB5TC Talimat Kitapçığı - Sayfa 5

Masaj Conair FB5TC için çevrimiçi göz atın veya pdf Talimat Kitapçığı indirin. Conair FB5TC 6 sayfaları. Massaging foot spa

USER/MAINTENANCE INSTRUCTIONS

1) Make sure foot spa is in OFF position.

2) Place foot spa on floor, fill with warm or cold water and plug into wall outlet.

Never plug or unplug the foot spa while your feet are in water.

3) The heat setting is designed to maintain the temperature of warm water, not to heat water.

4) Sit in a chair and place your feet in the water. Never stand in foot spa.

5) Press buttons to the desired setting of bubbles/heat and or massage/heat. A combination of

the 2 buttons will give you a third setting.

6) Turn the unit off after use and disconnect from outlet before emptying water.

7) To clean foot spa, rinse with water. (Never submerge unit in water.) Wipe with a damp cloth.

Do not use any strong chemical cleaners such as benzine.

8) This unit has no user-serviceable parts.

9) To store: Unplug the appliance from the outlet. Store in appliance box or a clean, dry place. To

avoid breakage, do not wrap the power cord around the unit. Do not hang the unit by the cord.

SAVE THESE INSTRUCTIONS

Choose one of the 3 attachments for additional massaging of the feet. To use:

1) Place selected attachment onto the post in the center of the foot spa.

2) Place foot on attachment and apply pressure. Move your foot around for more pressure and

treatment.

DANGER

Current only. This appliance is designed to operate at 110 to 125 volts A.C.

This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this

plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse

the plug. If is still does not fit, contact a qualified electrician. Do not attempt to defeat this

safety feature.

This unit has a two-wire double-insulated polarized plug.

This appliance is intended for household use only. Use on Alternating