Conair FB6LC Talimat Kitapçığı - Sayfa 3

Masaj Conair FB6LC için çevrimiçi göz atın veya pdf Talimat Kitapçığı indirin. Conair FB6LC 6 sayfaları. Massaging foot spa

15) This appliance is for household use only.

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider

than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully

in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the

proper outlet. Do not change the plug in any way.

CAUTIONS

• Conair™ Massaging Foot Bath should not be used if any of the following cases exist, unless

directed by a physician: Tuberculosis, benign and malignant tumors, hemorrhages, inflam-

mations of the skin, phlebitis and thrombosis, open and fresh wounds, bruises, broken skin

or varicose veins, undetermined calf pain, or joint pain.

• Consult your physician, if you have any questions regarding the therapeutic use of this foot

bath.

• Do not use before consulting your physician if you are experiencing unexplained pain or

swollen muscles, or have any history of serious muscular injury.

• Keep away from children.

• Discontinue use of appliance if pain increases or swelling occurs after application.

• If you are pregnant, please consult your physician before using.

USER/MAINTENANCE INSTRUCTIONS

1) Make sure foot bath is in "OFF" position.

2) Place foot bath on floor, fill with warm or cold water and plug into wall outlet.

Never plug or unplug the foot bath while your feet are in water.

3) The heat setting is designed to maintain the temperature of warm water, not to heat water.

4) Sit in a chair and place your feet in the water. Never stand in foot bath.

5) Position control knob to the desired setting.

6) Turn knob to "off" position after use and disconnect from outlet before emptying water. Pour

water out of the foot spa from the opposite side of the line cord only.

7) To clean foot bath, turn appliance off and unplug from outlet and then rinse with water. (Never

submerge unit in water.) Wipe with a damp cloth. Do not use any strong chemical cleaners or

solvents such as Benzine, harsh detergents or abrasives.

8) This unit has no user serviceable parts.