Conairphone CID402 Kullanıcı El Kitabı - Sayfa 5

Telsiz Telefon Conairphone CID402 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Conairphone CID402 6 sayfaları. Type i caller id phone with clock radio

CALLER ID OPERATION
Received Call
If only the caller's phone number is received, the display
shows the caller's phone number with the time and
date it was received. The NEW icon turns on and NEW
CALL LED blinks.
CALL
NEW
If both the caller's name and phone number are
received, the display shows the caller's name and
phone number, with the time and date it was received.
The NEW icon turns on and NEW CALL LED blinks.
CALL
NEW
Caller ID (Transmission) Error
If an incorrect, invalid or incomplete Caller ID signal is
received, the display shows 'DATA ERROR'.
Caller ID Private Call (Blocked)
If the name and number are not available due to the
caller's restriction, the display shows 'PRIVATE' with
the time and date received. The NEW icon turns on
and NEW CALL LED blinks.
CALL
NEW
Caller ID Out of Area (Data Not Available)
If the name and number are not available, the display
will show 'OUT OF AREA' with the call's time and
date. The NEW icon turns on and NEW CALL LED
blinks.
13
CALL
NEW
NOTE: If no key is pressed within 20 seconds, the
display will return to the Real Time Clock mode.
VIEW THE CALLER ID MEMORY
If you have new calls, the NEW CALL LED will blink.
Press [
] or [
] to read all of the most recent calls.
The NEW CALL # will decrease.
Once all the new calls have been read, 'END OF NEW'
will be displayed.
Press [
] to view the oldest calls, or press [
view the most recent calls.
After you view all the calls in memory, the display will
show 'END OF LIST'.
NOTES:
1. The NEW CALL LED will blink until all the new Caller
ID data has been reviewed.
2. If the
icon is turned on, you have received
RPT
multiple NEW calls from the same number.
3. The display can show the caller's name and phone
number with a maximum of 12 digits. If the caller's
name is longer than 12 characters, the display only
shows the first 12 characters. Or if the caller's phone
number is longer than 12 digits, the display only
shows the last 12 digits.
ERASING THE CALLER ID
INFORMATION
To Erase a Single Call in Memory
1. Press [
] or [
] for the Caller ID memory location
to be reviewed.
2. To clear a single Caller ID memory location, press
[DELETE], then the display will show 'DELETE?'.
3. Press [DELETE] once again, the data for that call
will be erased, and the CALL# and Caller ID
information will be updated.
14
To Erase All Calls in Memory
1. After all new message are reviewed, press and hold
[DELETE] for 2 seconds, then the display will show
'DELETE ALL?' .
2. Press [DELETE] once again to clear all the
information, then the message 'NO CALL' will
appear.
NOTE: You need to view all new calls before erasing
all calls in memory.
CALL BACK (REDIAL) FROM THE
CALLER ID MEMORY
Option 1
1. With the handset on the base, press [
] to
find the Caller ID memory location to be redialed.
2. Press [CALL BACK] twice to redial, the display
shows 'PICK UP CALL'.
3. Pick up the handset within 20 seconds, otherwise
the call will be terminated.
Option 2
1. Pick up the handset to make your phone call.
2. Press [
] or [
] to find the Caller ID memory
location to be redialed. Press [CALL BACK] twice,
the number will then be dialed automatically.
WHEN THE CALLER'S PHONE
NUMBER HAS A DIFFERENT
AREA CODE FROM THE PRESET:
The long distance dialing digit '1' will be inserted
automatically during Caller ID memory call back.
Press [CALL BACK], 11-digit number will blink. Press
[CALL BACK] again to confirm to dial the 11-digit
number.
15
WHEN THE CALLER'S PHONE
NUMBER HAS THE SAME AREA
CODE AS THE PRESET:
The 3 digits area code will be deleted automatically
during Caller ID memory call back.
Press [CALL BACK], 7 digits number will blink. Press
[CALL BACK] again to confirm to dial the 7-digit
number.
NOTE: Your telephone company may require a different
format for making out-of-area (toll) calls WITHIN your
area code. See the next section for the procedure to
obtain the applicable toll-call format for your phone
company.
] or [
] to
WHEN YOUR TELEPHONE COMPANY REQUIRES
YOU TO DIAL OTHER THAN A 7-DIGIT NUMBER
(SAME AREA CODE) OR 11-DIGIT NUMBER
(DIFFERENT AREA CODE) TO MAKE TOLL CALLS
WITHIN YOUR AREA CODE, FOLLOW ONE OF THE
4 OPTIONS BELOW FOR CALLER ID CALL BACK.
Option 1
1+Area Code+7-Digit Number (11 digits)
Option 2
1+7-Digit Number (8 digits)
Option 3
Area Code+7-Digit Number (10 digits)
Option 4
7-Digit Number Only.
Follow the procedure below to select one of
the above options for Caller ID call back.
With the handset hung up on the base.
1 Press [ ] or [ ] to find the Caller ID memory location
to redial. Press [CALL BACK], the 7-digit number (if
same area code) or 11-digit number (if different area
code) will blink.
2. Press [ ] or [ ] to select one of the options.
3. Press [CALL BACK] again to confirm the dial.
16