dams UHS800 Hızlı Başlangıç Kılavuzu - Sayfa 6

İç Mekan Mobilyaları dams UHS800 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. dams UHS800 14 sayfaları.

Prepare all the panels by inserting the listed fittings into the corresponding holes.

Step 5

Before inserting any fittings familiarise yourself

with the panel ensuring that you have it in the

same orientation as the image below.

Use the distance between the

drill holes as a guide.

Insert shelf support pins into the pre drilled holes

in face A, then flip panel and insert shelf support

pins into face B. Finally insert the pins into the

drilling on the top edge of the partition panel.

Step 6

Attach partition to back

panel using confirmat

screws provided.

A 4mm Allen key is required

to insert these screws.

Face A

180'

Face B

PIN01

PIN07

Qty 2

Qty 4

QUANTITY - 2

70mm CONFIRMAT SCREW

RM-CFM02