AIRTUG NFE-6 Montaj ve Kullanım Talimatları - Sayfa 3

Scooter AIRTUG NFE-6 için çevrimiçi göz atın veya pdf Montaj ve Kullanım Talimatları indirin. AIRTUG NFE-6 8 sayfaları.

www.airtug.com

Assembly Instructions

Note: It is recommended to have two people available for installing the handle to the frame. Following

that, it is easy for one person to complete the assembly in a short period of time.

In addition to the tug and the the handle, the following parts are included in the box with the

necessary fasteners:

1. one (1) Aircraft Nose-Wheel Attachment,

2. one (1) Handle "U" Bolt,

3. Zip Ties

Step 1: HANDLE Slide the handle through the "U" bolt (take care

while sliding the wires through as well) (leave the nuts loose for

now to allow the handle to slide into the "U" bolt). Insert second U

bolt as shown

Tighten the "U" bolt nuts (4) securely under the tug frame (9/16"

socket).

Step 2: WIRING The wires from the handle are designed to

only be attached the correct way:

The wires from the handle need to be connected to the following

wires:

a. The Blue Bullet needs to be mated with the Bullet coming

from the brake on the transmission