DAN NTP TECHNOLOGY DAD Thunder Core 256 Kurulum Kılavuzu - Sayfa 13
Kayıt Ekipmanları DAN NTP TECHNOLOGY DAD Thunder Core 256 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DAN NTP TECHNOLOGY DAD Thunder Core 256 16 sayfaları. Thunderbolt 3, dante, madi and adat digital audio interface
Sayfayı YazdırInstallation Guide Core 256
Digital I/O and Network
Connections
Doc no. AXCNTR-8001-A-4
Dual MADI SFP I/O mini-module
The Dual SFP module can operate as a MADI interface or as DADlink.
The Dual SFP module, can be installed with one or two "Small form-
factor pluggable" (SFP) transceiver modules supporting Optical LC
connection or mini coax HD-BNC electrical connection.
The mini coax HD-BNC electrical SFP connection works only with MADI.
The optical SFP modules are standard types, which can support single
mode or multimode optical fibres of various types as well as different
wavelengths. For MADI typically 1300nm types are used. Each SFP
module has a receiver and a transmitter part and can be used for MADI
audio I/O or DADlink or a combination. When using DADlink optical SFP
modules must be Gigbit/1000base types. For MADI optical SFP modules
can be both 1000base and 100base types.
The right part of the SFP connector is the receiver and the left part is
the transmitter.
Dual Ethernet, RJ45 connector, Gigabit
Pin 1.
BI_DA+
Pin 2.
BI_DA-
Pin 3.
BI_DB+
Pin 4.
BI_DC+
Pin 5.
BI_DC-
Pin 6.
BI_DB-
Pin 7.
BI_DD+
Pin 8.
BI_DD-
Thunderbolt 3 connectors
Two USB-C type connectors for connecting via Thunderbolt 3. The two
connectors 1 and 2 have the same functionality. One can be connected
to the computer and the other to an additional audio interface for
expansion or to a standard USB-C peripherical device providing non-
audio functionality.
Two chassis holes enables the use of ThunderLok 3L Thunderbolt
Connector Retention clips.
Note that a high-speed Thunderbolt 3 cable has to be used for
interconnection. The cable should be the following type:
Thunderbolt 3 20 Gbps or 40 Gbps USB-C cable and preferably Intel
Certified.
MADI connectors
Coaxial BNC connector for input and output of MADI signals via 75Ohm
Coax cables.
Rev. date 201123
Page 13 of 16