Dan D'Agostino Momentum Kullanıcı El Kitabı - Sayfa 4

Amplifikatör Dan D'Agostino Momentum için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Dan D'Agostino Momentum 13 sayfaları. Hd preamplifier
Ayrıca Dan D'Agostino Momentum için: Kullanıcı El Kitabı (13 sayfalar), Kullanıcı El Kitabı (10 sayfalar), Kullanıcı El Kitabı (15 sayfalar), Kullanıcı El Kitabı (11 sayfalar), Kullanıcı El Kitabı (11 sayfalar)

UNPACKING AND INstAllAtIoN

If any of the following items are missing, please contact your dealer:

1 Momentum Stereo amplifier encased in protective static cling vinyl

1 Transparent Audio AC power cord (some markets)

2 single-ended (RCA) to balanced (XLR) adapter connections

1 owner's manual

1 warranty card

1 pair of white lifting gloves

1 microfiber cleaning cloth

Unpacking the Momentum Stereo amplifier from the Pelican case

Two adults are recommended for lifting the nearly 100-pound amplifier from the Pelican

case. When the amplifier is still in its case, please move it to a location near the place where

it will be installed. Remove all jewelry including watches, rings and belts from your person to

avoid damage to the exterior of the amplifier during the removal and installation. Put on the

included white lifting gloves to avoid leaving fingerprints on the amplifier's chassis.

NOTE: You may see slight blemishes in the machined metal parts of the Momentum Stereo

amplifier's chassis. This is a normal and unavoidable artifact of the machining process.

The surface that will support the Momentum Stereo amplifier must be capable of safely

supporting the nearly 100-pound weight of the amplifier.

Adequate ventilation must be provided for the amplifier. There should be at least 3 inches

of clearance on each side of the amplifier and 3 inches of clearance at the top, and the

bottom vents of the amplifier must not be obstructed by thick carpet, dust, etc. We

recommend that the amplifier be installed in an open equipment rack or on an amplifier

stand to assure proper ventilation. The amplifier may be installed in a closed cabinet in an

equipment closet, but the cabinet or closet must be designed with substantial ventilation at

top and bottom; active ventilation (i.e., powered fans) is preferred. Do not place the amplifier

directly on a carpeted floor.

For best possible sound quality and maximum output, we recommend you connect the

Momentum Stereo amplifier to a dedicated 15-amp outlet.