DAN DRYER 4000 Kullanıcı Kılavuzu - Sayfa 7

Kurutucu DAN DRYER 4000 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DAN DRYER 4000 10 sayfaları.

WARM AIR SPEED ADJUSTMENT

• Switch off the power and remove the cover.

• Use Phillips screwdriver or flat notch.

The air speed is adjusted on the VR potentiometer.

Clockwise to increase air speed(+).

Counterclockwise to decrease air speed(-).

• Switch off the power and remove the cover.

• The heating element switch is located on the timer.

Adjust with a flat screwdriver:

• Slide switch to "ON" = heating element on.

• Slide switch to "1" = heating element off.

SENSOR RANGE ADJUSTMENT

• The sensor range is adjustable between 100mm and 230mm.

Standard range 130mm ± 20mm.

• Clockwise: To increase sensor activation range (+)

• Counterclockwise: To decrease sensor activation range (-)

• The sensor activation range should be adjusted to its environments,

e.g. light and distance to the bottom of the sink.

Note: Do not overturn the sensivity adjustment.