DAN DRYER SOAPTAP 378 Kullanıcı Kılavuzu - Sayfa 4

Ev Aletleri DAN DRYER SOAPTAP 378 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DAN DRYER SOAPTAP 378 9 sayfaları.

INSTALLATION

4. Use a template to drill the holes for the bracket. Install

bracket close to Soap/Foam Tap; behind a wall, in a

cabinet, or under the sink

6 mm

6. Connect the soft rubber tube to the outlet of the pump,

and place the pump into the soap container.

5. Fasten bracket into the pre-drilled holes.

7. Connect the tube to the pump and the cables to

the control box.

INSTALLATION

8. Insert soap container 1.5 or 3 L. Confirm the container is

placed correctly to activate the dispenser. The fork should

be on top of the disc at the pump top.

9. Connect 6 V DC power supply to control box.