Abt ABT-20 Kurulum Kılavuzu - Sayfa 4
Güvenlik Sensörleri Abt ABT-20 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Abt ABT-20 9 sayfaları. Dual-beam active photoelectric intruder detector with digital frequency conversion
Sayfayı Yazdır
1.Remove the cover
2.Attach the paper stencil onto the location
where the equipment is to be mounted, and
drill the holes in the positions on its mark.
3.Put the cable through the hole for wiring.
4.Fix the main body onto the wall
5.Connect the cable to the wire terminal.
6.Put on the cover after adjusting
the response time of the beam.
Wiring hole
15mm
power supply
power supply
Installation
Installation of of of of fixed
Installation
Installation
1.Drill a hole on the bracket and
extend out the cable from it.
2.Remove the cover.
3.Fasten the base-plate to the bracket.
(Back-to-back installation guiding diagram)
Tamperproof
switch terminal
spare terminals
transmitter
alarm output
Wiring distance between transmitter and receiver
Tamperproof
switch terminal
receiver
fixed
bracket
fixed bracket
fixed
bracket
bracket
DC13.8V
300m
400m
700m
1000m
DC24V
300m
800m
1400m
2000m