2Box Drumit Three Hızlı Başlangıç Kılavuzu - Sayfa 11

Davullar 2Box Drumit Three için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. 2Box Drumit Three 20 sayfaları.

UNIT-TRIG

UNIT-HSET This page is used to set the hi-hat pedal's sensitivity/level

This completes the hi-hat settings!

6 Connections

This module provides the following inputs and outputs:

USB

Use a commercially available USB cable to connect the module to

your computer.

12V DC

This is where you connect the external power supply.

MIDI IN

Connect this to the MIDI OUT socket on the external MIDI controller

to allow the module to receive MIDI messages.

MIDI OUT

Connect this to the MIDI IN socket of the device that should receive

MIDI messages from the module.

Channels

Connect your pads to the inputs that correspond to the instrument

you wish to trigger. The hi-hat controller needs to be connected to

the HIHAT B socket. The B channels of CYMB 1~3 are intended for

pads that accommodate 2 stereo cables.

Given that all inputs are balanced (stereo), be sure to only connect

stereo cables.

This is where you set the hi-hat pedal's response and

sensitivity. Set the main parameters (GAIN, THRES,

CURVE) to match your playing style.

The most important of these is GAIN. Set it so that only the

most forceful strikes produce a Level value of 0.0.

(SENS) and its dynamic response (CURVE).

11 / 20