Anybus Communicator CAN PROFINET IRT 2.32 Ağ Kılavuzu - Sayfa 13

Sunucu Anybus Communicator CAN PROFINET IRT 2.32 için çevrimiçi göz atın veya pdf Ağ Kılavuzu indirin. Anybus Communicator CAN PROFINET IRT 2.32 20 sayfaları. Interface
Ayrıca Anybus Communicator CAN PROFINET IRT 2.32 için: Kurulum Kılavuzu (2 sayfalar)

Sayfayı Yazdır

Network Configuration

4.2.4

IPconfig Settings

Additional settings for IPconfig can be accessed by clicking on Settings.

Fig. 8

IPconfig settings

Network Interface

Check this option to select a specific network interface to use when scanning for devices from a

computer which has more than one interface. If this option is left unchecked, all available net-

works will be scanned.

Internal DHCP Server

If a device has been set to use DHCP but there is no DHCP server on the network, the device

may not be detected by IPconfig. To recover access to the device an internal DHCP server in

IPconfig can be temporarily activated:

Click the checkbox for Internal DHCP Server, then click OK. IPconfig will automatically re-

fresh the scan and list the missing device in the main window.

Select the device and configure it to use static IP addressing instead of DHCP.

Disable the internal DHCP server.

4.3

DCP (Discovery and Control Protocol)

Anybus X-gateway PROFINET IRT (2.32) supports the DCP protocol, which allows a PROFI-

NET IO Controller/Supervisor to change the network settings during runtime. If successful, this

will replace the settings currently stored in the ethcfg.cfg file.

Anybus

X-gateway

™

PROFINET

Do not enable the internal DHCP server if there is already an active DHCP server

on the network.

IRT (2.32) Interface Network Guide

11 (18)

SCM-1202-028-EN 1.1