ADDER AdderLink X100 Kullanıcı Kılavuzu - Sayfa 7

Alıcı ADDER AdderLink X100 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ADDER AdderLink X100 19 sayfaları. Extender set
Ayrıca ADDER AdderLink X100 için: Kullanıcı Kılavuzu (19 sayfalar)

Sayfayı Yazdır

Connections at the X100 (remote) module

1 Place the X100 module adjacent to the remote user location.

2 Attach the video monitor, keyboard, mouse (and, optionally for X100A

users, speaker) connectors to the sockets of the Adder X100 module.

From mouse

From keyboard

From video monitor

3 Attach the connector of the cable run leading from the CAM to the

TO LOCAL

Category 5, 5e or 6

cable leading to the

Adder X00

module

4 (X100A models only) Insert the speaker connector to the light green

coloured socket situated between the link connector and the power in

socket.

5 Insert the output connector of the power supply into the socket at the front

edge of the X100 module labelled

6 Insert the IEC connector of the supplied power lead into the corresponding

socket of the power supply. Connect the other end of the power lead to a

nearby mains socket.

7 Where necessary, use the in-built video compensation feature to eliminate

any effects caused by the cable run. See

socket of the X100.

CAM module

From

speakers

power

(X00A models

adapter

only)

POWER

Video.compensation

Adder X00

module

for details.