ADDER AdderLink X100 Kullanıcı Kılavuzu - Sayfa 14

Alıcı ADDER AdderLink X100 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ADDER AdderLink X100 19 sayfaları. Extender set
Ayrıca ADDER AdderLink X100 için: Kullanıcı Kılavuzu (19 sayfalar)

Sayfayı Yazdır

3 As appropriate, press either the R, G or B keyboard keys to

select the appropriate colour channel. Corresponding

keyboard indicators will flash rapidly to show which

channel is currently selected for adjustment:

Num Lock for Red, Caps Lock for Green and

Scroll Lock for Blue.

4 Press the

and

keys to retard or advance the timing of the selected

colour channel respectively. On screen you will see a change in the position

of the selected colour crosses (or colour bars) in relation to the other two.

Restore

default

skew

settings

Exit image

controls

and save

settings

Retard

colour

timing

5 When the selected colour crosses (or colour bars) are correctly positioned,

press

to exit that colour channel. The keyboard indicators will return to

flashing in sequence.

6 If required, repeat steps 3 to 5 to select and adjust any colour channel until

the vertical lines of the red, green and blue crosses are all aligned.

7 When all colours are correctly aligned on all video channels, press

configuration mode and permanently save all settings.

Note: Once you have made the skew adjustments, it may be necessary to

re-adjust the image controls to attain optimum screen images.

Miscellaneous settings

The following are configuration settings within the modules that are not covered

in other sections of this guide. These can be achieved once within configuration

mode by pressing the indicated keys:

Report X00-series firmware version -

Before initiating this command, ensure that the system is running an application

that can display typed keys as screen characters - e.g. a word processor

or Windows Notepad. The current firmware version will be written to the

application in the form of the letter 'V' followed by three numbers - for example

V201 means version 2.01.

Reset all configuration options to default states -

Returns all user configurable options to the settings that are installed at

manufacture. The password will be cleared, however, any current image control

settings or skew adjustments will not be reset.

Advance

colour

timing

to exit