Abtech 258141 Kullanım Kılavuzu - Sayfa 4
Işık Fikstürü Abtech 258141 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Abtech 258141 8 sayfaları. Led flashing light 12-24v
- Puissance maximale : 27W
- 18 LED
- IP 67 : totalement étanche à la poussière. Protégé contre l'immersion temporaire jusqu'à 1 mètre de
profondeur.
Ne pas utiliser un projecteur endommagé. Remplacer tout écran fi ssuré. Si le modèle ne
le permet pas, cesser d'utiliser le produit.
Ne pas fi xer la source lumineuse en cours de fonctionnement.
La source lumineuse de ce luminaire n'est pas remplaçable; lorsque la source lumineuse atteint sa fi n de sa
vie, le luminaire entier doit être remplacé.
ENVIRONNEMENT : Préserver la santé des personnes en sauvegardant les ressources naturelles et
l'environnement ; ne pas jeter cet appareil avec les ordures ménagères mais le déposer, lorsqu'il sera
en fi n de vie et hors d'usage, dans un centre de récupération et de recyclage des appareils électriques
ou chez un distributeur (selon réglementation et situation géographique, en application de la directive
2012/19/CE).
4
INSTRUCTION MANUAL – FLASHING EMERGENCY LIGHT 12/24V – LED
GB
REF. 258141 - 258151
IMPORTANT : These instructions are provided for your safety. Please read them carefully before use and
keep them safe for later reference.
SAFETY GUIDELINES:
• The fl ashing emergency light must be securely attached to the surface it is fi tted on.
• Ensure that it is mounted correctly to avoid any water entering it.
• There should be nothing covering the fl ashing emergency light.
• Important: do not position the fl ashing emergency light close to radiators, fl ames or any other source of heat.
• Do not drop the fl ashing emergency light.
• Always switch off the electrical power supply when installing or removing the fl ashing emergency light
• The fl ashing emergency light must be connected to an electrical power source protected by a 5A fuse
• Ensure that children do not play with the fl ashing emergency light.
Model
Mounting
258141
on DIN rod
258151
Magnetic
INSTALLATION
- Connect the fl ashing emergency light to the 12/24V power supply.
- Model 258141 : the beacon is attached directly to a compatible cylindrical adapter, which also provides
power by means of a DIN connector.
- Model 258151 : the adaptor is compatible with "cigarette lighter" type sockets or DIN.
You will fi nd a complete range of ABTECH adapters for lateral support (ref 246561), central support (ref
246571) or extension (ref 246581).
- The fl ashing light is attached to the vehicle by its magnetic base. If the body of your vehicle is not magnetic,
you can mount the magnetic base on your vehicle according to diagrams 1 or 2 below
1.
base magnetica
Rondella
Vite
Adesivo
SELECTING THE FLASH MODE
- Scroll through the different fl ash modes by pressing the button in succession until the desired mode is
obtained. The available modes are : Standard single fl ash,
Fast double fl ash, Slow double fl ash, Triple fl ash, Quad
fl ash, Mega fl ash, Rotating light, Off.
- Model 258141 : The mode selection button is located on
the cigarette lighter plug.
- Model 258151 : the button is located at the base of the
fl ashing light.
Connection
DIN rod connection
Cigar lighter
Vite
2.
Superfi cie
di montaggio
Rondella
Dadi e bulloni
13