ANYKIT AKS400 Kullanıcı Kılavuzu - Sayfa 17

Analitik Cihazlar ANYKIT AKS400 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ANYKIT AKS400 19 sayfaları. Otoscope

TROUBLESHOOTING

No camera

Please make sure you have pluged the camera probe in completely until

you hera a snap. lf it still does not work please feel free to respond via

[email protected] or contact our support line at 877-899-8809,

Mon.-Fri. 8:00-5:00 PST

Blurry image

The focal length is ﬁxed at 10mm-20mm (0.4-0.8 inch), so please

adjust the distance between the camera lens and your ear to get

focused if you cannot see the image clearly.

Blurry image after several uses

Please clean the camera before and after every use to avoid blurry

image. Blurred images after a period of use are caused by the earwax

on the camera lens. (In general, earwax is oily and can cause glare,

unclear image) .

Cannot thoroughly clean the lens

Please follow the steps：

1.Clean the lens carefully with alcohol pads.

2.Wipe the lens grooves with alcohol-soaked cotton swab.

- 13 -