Anyload EB300 Kullanım Kılavuzu - Sayfa 6

Terazi Anyload EB300 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Anyload EB300 18 sayfaları. Weighing scale

Sayfayı Yazdır

7. Basic Function Operation

7.1 Zero adjust

When scale plate is empty and display does not show zero value, press ZERO key to correct.

7.2 Tare function

Put the container on the plate. After stable, press the TARE key to deduct the weight value of the container, then
put the object in the container. The scale will show the net weight value of the object.
Remove the container and weighing object, the display shows the negative weight value of the container. Press the
TARE key to clear the weight value of the container.
Advice: If there are instability or temperature differences, display will not show 0 value. In this case, press
key to correct it.
Tare Range: Tare value cannot exceed the maximum scale capacity. The real scale capacity is the maximum
capacity minus the tare value (Real cap. = max. cap.- tare)..
Tare memory
The scale has 20 numeric tares available. To enter tare memory, follow the procedure below:
Memory programming
key. Display will show "PLUPro". .Press
1) Press
shows "TLUPro"
EB300 User Manual
key several times until display
Page 6 of 18