Anyload ES-103HA Ürün Kılavuzu - Sayfa 6

Terazi Anyload ES-103HA için çevrimiçi göz atın veya pdf Ürün Kılavuzu indirin. Anyload ES-103HA 9 sayfaları. Precision balance

Anyload ES-103HA Ürün Kılavuzu
In a few seconds, the display will stop, and meanwhile the calibrating weight
value will be shown, indicating that calibration is over. Normal weighing can be
done

5.4.2 Linear calibration

Being in the state of "LINE", press
few seconds, the balance will display 1/2 weight value of full capacity;
according to the shown weight value, put the corresponding calibrating weight
on the center of the platform.
In a few seconds, the balance will display the full capacity weight value,
according to the shown weight value, put the corresponding calibrating weight
on the center of the platform. In a few seconds, the display will stop, and
meanwhile the calibrating weight value will be shown, indicating that
calibration is over. Normal weighing can be done
NOTE: The balance linear has been calibrated in the factory, unless the users
need to change the load cell or have the right weight.
Mode
ES-103HA
Cal.
50g/100g
Weight

5.5 Counting Function

The balance will count parts based on the weight of a reference sample: 5, 10,
20, 30, 40, or 50 parts. To get more accurate counting result, the weight of the
parts should be equal, meaning the less the error of the single part is , the
better.
(1) Press
(2) Place a container on the platform, then press
"pc ADD 5" which is the preset reference quantity. "5" shows the quantity of
the reference sample.
(3) To change the reference quantity, press
quantity is displayed. Press
sample.
NOTE: If you want to restart parts counting, repeat the operation steps above.
If "PC Err" is displayed, it means the sample is too light to provide accurate
results within the error range set by the balance.
5 |
ANYLOAD ES-HA Series Precision Balance Product Manual (V1611)
ES-203HA
ES-300HA
100/200g
100/300g
, the balance will display "pc CON".
to make sure the quantity of the reference
, the balance will display "0". In a
ES-500HA
ES-600HA
200/500g
200/600g
repeatedly until the desired
ES-
ES-
1000HA
1200HA
500/1000g
500/1200g
the balance displays