ANYSUN Aukfa 7D1 Kullanıcı Kılavuzu - Sayfa 17

Dijital Kamera ANYSUN Aukfa 7D1 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ANYSUN Aukfa 7D1 19 sayfaları. Sewer inspection camera with distance counter

Sayfayı Yazdır

7：Blue screen's Solve Method

Method 1：

1. Checking whether all parts are in well connected, and tighten the camera

head.

2. Please gently unscrew the camera head( pic1 ) , and then use clean non-

dust and dry cloth to clear the part to avoid dust, ash and dirt( pic2 ). After cleaning,

pls connect other parts well and turn on the control box switch, then screw into the

camera head.

(Pic 1)

Method 2：Cable for Testing (Instructions for use)

In the package you will receive a testing cable to test the camera when the screen

has gone blue (the screen display" please select the input signal").

1: Ensure the control box is in fully charged, then turn switch to ON/BATT, and

turn " LED BRIGHT" switch to Max.

2: Connect data cable into Camera from power supply as shown in Pic 1 .

3: Connect camera probe into the connection as shown in Pic 2.

If the camera LED turns on then the camera probe is fine and need to replace

cable .

If the camera LED lights does not turn on then need to replace camera probe.

pic 1

pic 2

(Pic 2)