DuctlessAire 15 seer Kullanıcı Kılavuzu - Sayfa 4

Klima DuctlessAire 15 seer için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DuctlessAire 15 seer 8 sayfaları. Inverter split type - room air conditioner

Sayfayı Yazdır

NAMES OF PARTS

Air inlet( rear)

Air inlet (side)

Air outlet

fresh defrost run timer

Names of parts

Indoor unit

1. Front panel

2. Air inlet

3. Air filter

4. Air outlet

Horizontal air flow grille

Vertical air flow louver(inside)

7. Display panel

Outdoor unit

8. Connecting

pipe

9. Connecting

cable

10. Stop valve

NOTE:

All the pictures in this manual are for

explanation purposes only.

The actual shape

of the indoor unit you purchased may be slight

different on front panel and display window.

The actual shape shall prevail.

Indication lamp

FRESH indication lamp(optional)

Lights up when Clean Air feature is activated.

RUN indication lamp

This lamp illuminates when the air

conditioner is in operation.

TIMER indication lamp

Lights up during Timer operation.

DEFROST i

ndication lamp

(Enabled on cooling & heating models only):

Lights up

when the air conditioner starts

defrosting automatically or when the warm

air control feature is activated in heating

operation.

Temperature indicator

Displays the temperature settings when the

air conditioner is operational.

Displays the malfunction code.

Special functions

Refrigerant Leakage Detection

With this new technology, the dipsplay area will appear EC (if applicable) and the LED

indication lamps continue flashing when the outdoor unit detects refrigerant leakage.

Louver Angle Memory Function(optional):

Within the scope of safety angle, it will memorize the open angle of horizontal louver.

If it exceeds, it will memorize the boundry of safety angle. In the following circumstances,

it will return to standard angle: 1) pressing the manual control button, 2)unplug and then

plug in the machine.

So we strongly suggest that the open angle of the horizontal louver

should not be set too small, in case the condensed water forms and drops from the

horizontal louver.

SELF CLEAN function Optional

Function used after the Shut Down of cooling operation to clean the Evaporator

and keep it as fresh for the next operation.

The unit will operate as following sequence : FAN ONLY mode at Low fan speed--Heating

operation with LOW fan speed(applicable to cooling & heating modles only) ---FAN ONLY

operation--Stop Operation---Turn off.

Note:

This function is only available under COOL(AUTO COOL, FORCED COOL) and DRY mode.

Before select the function, it is recommended to run the air conditioner under Cooling

operation for about half an hour. Once the Self Clean function is activated, all TIMER

setting will be cancelled.

During Self Clean operation, when press the SELF CLEAN button on the remote

controller again will stop the operation and turn off the unit automatically.

CLEAN AIR function(on some models)

Improving the quality of indoor air is one of the purposes of an air conditioner. This air

conditioner is equipped with ionizer or Plasma Dust Collector(Depending on specific

configuration of the model). With the anions generated by Ionizer, the air circulation

of the air conditioner fills the room with refreshing, natural and healthy air. The Plasma

Dust Collector generates a high voltage ionization zone, through which the air is

converted to plasma. Inside the air most of the dust, smoke, and pollen particles are

captured by the electrostatic filter.

Anti-mildew function Optional

When turns off the unit on COOL, DRY, AUTO (Cool) mode, the air conditioner will continue

operating for about 7-10 minutes (depending on models) at LOW fan speed. If turns off on

HEAT mode, the unit will continue operating for about 30 seconds at LOW fan speed. This will

help to dry up the condensed water inside the evaporator, and prevent the breeding of mildew.

Under Anti-mildew operation, do not restart the air conditioner until the unit is completely off.