AnyTone AT-D868UV Ürün Yazılımı Güncelleme Prosedürü - Sayfa 7
Radyo AnyTone AT-D868UV için çevrimiçi göz atın veya pdf Ürün Yazılımı Güncelleme Prosedürü indirin. AnyTone AT-D868UV 8 sayfaları.
Ayrıca AnyTone AT-D868UV için: Ürün Yazılımı Kılavuzu (8 sayfalar)
Sayfayı Yazdır
After making these changes, you are now ready to write this personalized code
plug to your radio. The first thing you should do is SAVE the modified file with a
unique name. Some people like to use a file name that included the date the file
was modified. To save your file with a unique name, click File and Save As.
Then type in a unique name, choose a location to save to and click Save, as
seen below.
Now that your file is saved, you can write it to your radio. Before you can read
from or write to the radio, you must install the Windows driver. This driver is
included with other files, each time a firmware update is released. This driver is
required for updating firmware, so if you have already done that, you've already
installed the driver. On the off chance you're only reading this section on
installing a code plug, install the driver. It's file name is
PC_cable_GD_VirtualComDriver 1.0.1.2118.
With the radio turned off (always have the radio off when connecting the USB
cable), attach the cable to both the radio and the computer. Turn the radio ON
and allow it to cycle through the Power-on Screen. Choose Set and Set Com.
From the drop down box that opens, choose the required Com Port (this is
usually the last one in the list). Then click OK.