AnyTone D868UV Ürün Yazılımı Güncelleme Kılavuzu

Radyo AnyTone D868UV için çevrimiçi göz atın veya pdf Ürün Yazılımı Güncelleme Kılavuzu indirin. AnyTone D868UV 2 sayfaları.

Turn off the GPS and APRS functions to prevent the radio from going into TX when

connected to the computer, as it may cause damage to the CPU or memory IC

Important Notice for Driver

We have a new driver GD_VirtualComDriver v2.0.2.4944.rar released, some users

who have the driver issue before are able to get the new driver working now.

Firmware Updating

1. Install USB driver: GD_VirtualComDriver 1.0.1.2118.rar，choose X86 for

32bit system, X64 for 64bit system.

2. In CPS->Set->Set Com, choose the correct com port

3. In CPS-Tool, choose the firmware upgrade.

3. Hold pressing PTT key and PF3 key(top alarm key), at the same time power on

radio, the red LED blink.

4. Use the PC cable to connect PC and radio

5. Click Open Update File，choose 878UV.spi

6. Choose correct Com Port

7. Click Write to update the radio to the latest firmware. After the

firmware update, the radio should return to normal display on screen.