AnyTone BT01 Kullanıcı Kılavuzu - Sayfa 16

Mikrofon AnyTone BT01 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AnyTone BT01 20 sayfaları. Bluetooth microphone

Sayfayı Yazdır

Main CH Switch Choose channel A or channel B as the main channel

Hot Key 1~6

Work Alone

Nuisance

Delete

Digi Monitor

Sub CH On/Off

Priority Zone

Program Scan

Enhanced

Sound

LastCall Reply

Switch ChType

Ranging

Roaming

CH Ranging

Selects Hot Keys 1-6 Note: Hot key setup details on

Turn on/off the work alone function.

During scanning, press the key to skip the unwanted

channel

In DMR mode, press the key to turn on/off digital

monitor

Turn on/ off the sub channel

Switch to Priority Zone

Press the key to start the scan in VFO channel scan

start and end frequency must be programmed in

CPS.

In digital channel, switch the microphone tone to

normal or enhanced mode.

In digital channel, press the key to access the last

call and press PTT to call back.

Switch the channel type(Analog, Digital, Ana+Dgi,

Dgi+Ana)

When the radio receives a call and the suspension

time is on, press the key programmed as "Ranging"

to obtain the caller's position and distance. (Both

party need GPS positioned, or will receive only GPS

information)

In standby, press the key programmed as "Roaming"

to search and lock on the repeater with strongest

signal. (Note: After lock on a repeater, the radio

will return to last frequency only after channel or

frequency is changed. The repeater frequency list

must pre- programmed in CPS.)

In standby, if the call contact type for a channel

is "Single call" , press the key programmed as "

Channel Ranging" to turn on this function. The radio

will automatically start ranging function when turn to

this channel.