anytronics Anyscene 512 Kurulum ve Kullanım Kılavuzu - Sayfa 2

Kontrolör anytronics Anyscene 512 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. anytronics Anyscene 512 13 sayfaları. Scene recall unit

Sayfayı Yazdır

1. Overview and Operation

The front panel has ten buttons and ten LED indicators. Switches labelled 1-7 have their

own blue mimic LEDs and are used for storing and recalling the contents of the 23

programmable memories.

The Up and Down buttons are normally used to control the Master level, allowing control

of the overall lighting level. They also provide access to the upper and lower memory

banks, each of eight scenes.

The green power LED shows when the unit is powered up, and the yellow data LED

indicates that the unit is receiving suitable programming data from a DMX source. Switch

0 is the blackout switch and when enabled the corresponding red LED will flash to indicate

the unit is in this mode.

The RJ45 sockets are on the back of the PCB along various option DIL switches and the

connectors for the external scene recall control.

The Anyscene 512 is also available with a reduced number of buttons for applications that

require less than the standard number of scenes. These include a 4-button version

allowing four user defined scenes to be programmed / recalled and a 5-button version that

also has the four user defined scenes, plus the blackout function / button of the standard

unit.

2. Mounting

The Anyscene 512 should be mounted using UK double pattresses with an approximate

depth of 32 mm.

Units 5 & 6 Hillside Industrial Estate

London Road, Horndean,

Hampshire, PO8 0BL

Tel +44 (0)23 9259 9410

Fax +44(0)23 9259 8723

Page 2 of 13

AT1039 Issue 1

Anyscene 512 Operating

Instructions