Anyware Instruments Moodulator Kullanıcı Kılavuzu - Sayfa 18

Sentezleyici Anyware Instruments Moodulator için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Anyware Instruments Moodulator 19 sayfaları.

Safety Instructions

Please follow the instructions for use of the instrument carefully because this will guarantee

proper operation of the instrument. Due to the fact that these instructions touch on Product Liability, it is

absolutely imperative that they be read carefully. Any claim for defect will be rejected if one or more

of the items has not been observed. Disregard of the instructions can void the two years covered by warranty.

Transport the instrument carefully, never let it drop or fall over. Make sure that during transport and in use

the instrument is supported properly and cannot drop, slip or fall over because people might get injured.

Never use the instrument in the immediate proximity of electronic devices (e.g. monitors, power

supplies, computers) as these interferences could cause malfunctions within MOODULATOR and corrupt

memory data.

The instrument may only be operated at the voltage stated on the power input on the rear panel. Before

opening the case, disconnect both power plug and power adaptor.

No liquids or conducting substances must get into the instrument. Should this be the case, the instrument

is to be disconnected from mains power immediately and examined, cleaned and possibly repaired by a

qualified technician.

The instrument may only be used for the purpose described in this operating manual. Due to safety

reasons, the instrument must never be used for other purposes.

Never expose the instrument to temperatures above +50° C or below -10° C. Before operation, the

instrument should have a temperature of at least 10°C. Do not expose the instrument to direct sunlight.

Do not install the instrument near heat sources like heaters, open fire places, central heating etc.

Keep the top of the instrument clear in order to allow proper ventilation, otherwise the instrument

could eventually overheat.

Never place heavy objects on the instrument.

All eventual modifications are to be performed by a qualified person only in accordance with valid safety

instructions. With the introduction of a third person, the warranty will be void. In case of a destroyed

warranty seal, any warranty claim will be rejected.

The instrument must never be operated outdoors but solely in dry rooms. Never use the instrument in a

humid or wet environment, nor near flammable goods.