Concorde A80 Kullanım Kılavuzu - Sayfa 6

Telsiz Telefon Concorde A80 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Concorde A80 8 sayfaları.

But if the numbers are all set as VIP number and the memory is full, the unit will auto the earliest VIP

number.

It will ring a special ringing tone when a VIP call comes.

SETTING MENU

SETTING DATE AND TIME

1. In on-hook state, press SET key, LCD displays SET 1 DATE.

2. Press SET key, the last two digits of year flash.

3. Press UP/- or DOWN/+ key to edit the year, press SET key to confirm, by using the same method to set the

month, date, hour and minute.

4. Press DEL key to quit.

Note: Month: 1-12 Date: 1-31 Hour: 00-23 Minute: 00-59.

SETTING LOCAL AREA CODE

1. In on-hook state, press SET key and then press UP/- key, LCD will display SET 2 CODE

2. Press SET key again, LCD displays CODE - - - - -

3. Press UP/- or DOWN/+ key to set the first digit of local area code.

4. Press SET key to confirm and enter the second digit setting, follow same steps to set the last 4 digits.

5. Press DEL key to quit.

Note: If the local area code only 4 digits, the last digit can be left as "-".

After set the local area code, unit will auto-filter the area code if the incoming call number with the first several

digits as same as the local area code.

SETTING PABX CODE

1. In on-hook state, press SET key and then press UP/- key 2 times, LCD will display SET 3 PCODE.

2. Press SET key to confirm, LCD displays PCODE --, the first "-"flash and indicate to set the first digit of

PABX code.

3. Press UP/- or DOWN/+ key to set the PABX code. Press SET key to confirm and enter the second digit

setting.

4. Following same steps to set the second digit.

Notes:

If only one digit of PABX code, left the second digit as"-".

If set PABX code, when dialing back incoming call or pre-dial a number, and if the number is 6 digits or

more than 6 digits, the telephone will auto-add PABX code ahead the incoming number or the pre-dialing

number which is not lead by PABX code and then pause 1 second.

SETTING AUTO IP

In on-hook state, press SET key and then press UP/- key 3 times, LCD will display SET 4 AUTO IP.

Note: This function is unavailable, so the users do not need to set this item.

SETTING LCD CONTRAST FUNCTION

In on-hook state, press SET key and then press UP/- key 4 times, LCD displays SET 5 LCD

Press SET key to enter, LCD displays LCD 3, press SET to enter, LCD displays LCD 3, press UP/- or

DOWN/+ to select among 1~5 levels.

Press SET key to confirm and exit.

SETTING RINGING TONE

There are 8 kinds of ringing tone for selection: