Concourse SMART WHEELS Kullanıcı Talimat Kılavuzu - Sayfa 5

Scooter Concourse SMART WHEELS için çevrimiçi göz atın veya pdf Kullanıcı Talimat Kılavuzu indirin. Concourse SMART WHEELS 11 sayfaları. Remote pairing procedure
Ayrıca Concourse SMART WHEELS için: Kullanıcı Talimat Kılavuzu (16 sayfalar), Kullanıcı Talimat Kılavuzu (20 sayfalar), Montaj Talimatları Kılavuzu (12 sayfalar), Hızlı Başlangıç Kılavuzu (3 sayfalar)

Sayfayı Yazdır
Concourse SMART WHEELS Kullanıcı Talimat Kılavuzu
3.0
CONNECTING THE SMART WHEELS TO A CLICGEAR BUGGY
3.1 Position your buggy in a safe manner then remove the
original Clicgear buggy wheels by unscrewing the lock-
nut . Please ensure you use a 19mm Ring spanner to avoid
damaging the nut .
3.2 Locate the 2 small metal Smart Wheel Axles – Left and
Right are the same and fit on either side . You will notice for
Clicgear buggies the axles are attached using a lock nut .
PUSH
19MM RING
SPANNER REQUIRED
concoursegolf.com
3.3 Connect both Smart Wheels axles to your existing push
buggy where you removed the original buggy wheels
from as indicated below .
MODELS ONLY
MOST CLICGEAR MODELS
8
3.4 The Smart Wheels are labelled Left and Right .
Left and Right of the buggy is determined by standing behind
the buggy holding the handle as you would do during play.
Now pick up one wheel and guide it onto the Axle already
connected to your buggy . To avoid excess dirt clogging the
charging socket it is recomended to position the charging
socket at the highest point from the ground as you slide the
wheel into positon . Press the red button on the outside of the
wheel as you guide it onto the axle . Release the red button
when the wheel is in position .
1
2
User Instruction Manual | Version 6.0
concoursegolf.com
3.5 To ensure each Smart Wheels is securely locked in place you
may need to slightly rotate (up to ¼ turn) so the raised point
on outside of the axle neatly slots into the corresponding
indentation on the hub of the wheel .
This ensures the central hub of each Smart Wheel locks in place
and does not free-wheel .
Once both wheels are connected in the same manner they will
be able to drive the buggy .
SECURELY LOCKED IN POSITION
9
User Instruction Manual | Version 6.0