Anywhere Fireplace Chelsea Stainless Steel Kurulum Talimatları Kılavuzu - Sayfa 3
Kapalı Şömine Anywhere Fireplace Chelsea Stainless Steel için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Anywhere Fireplace Chelsea Stainless Steel 6 sayfaları. Bio-ethanol fireplace
Sayfayı Yazdır
MOUNTING INSTRUCTIONS
Use a level to mark a straight line with a pencil on the wall where you will mount the brackets. The wall should be made
from drywall, tile, brick, stone, ect. It must not be flammable (e.g. no wallpaper or wood) Make sure you mount the
fireplace at least 4 feet away from any drapes or flammable materials.
The brackets should be spaced 4 inches apart. Mark bracket hole locations on the wall with a pencil keeping them level
with the line previously drawn.
Step 2
Using a 3/8" drill bit, drill holes into the wall on the 4 spots where you marked the bracket hole locations.
Step 3
Insert the wall anchors flush into holes in wall as shown in step 3. A light tap with a hammer might be necessary to
insure it is inserted flush with the wall. If you drill a hole into a wooden stud, the wall anchor is not necessary.
NOTE: The wall anchors provided are intended to be used in drywall. If mounting on another wall surface, make sure
you have the proper mounting hardware.
Step 4
Place brackets over holes of anchors and attach to the wall by inserting anchor screw through the bracket into the
anchors in the wall. Repeat for all four screws.
Step 5
Using a screwdriver, attach wall spacers to the back of the fireplace in the predrilled holes using the spacer
screw. If they are already attached, insure it is on securely.