Duerkopp Adler 173 Kullanım Talimatları Kılavuzu - Sayfa 13

Dikiş Makinesi Duerkopp Adler 173 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Duerkopp Adler 173 16 sayfaları.

3.6 Setting the feeding length

Bottom feed

The feed dog feeding length is

adjusted at dial 4.

Top puller feed

The feeding length of the puller 9 is

adjustable independent of the bottom

feed at dial 3 and can thus be

adapted to the feeding characteris-

tics of the material.

When sewing with stitch condensing

at the seam beginning and seam

end, the puller feeding length au-

tomatically adjusts to the feeding

length of the bottom feed.

Please note:

–

The puller can be swung out of the

sewing area using the hand lever, eg

for sewing with the bottom feed only.

–

To raise the puller when sewing radii

or corners, operate the lower key 5 at

the sewing head.

–

The fabric keep-off plate 8 serves

simultaneously as trimming knife for

the thread chain. (Only on machines

without thread trimmer.)

–

The puller pressure is adjustable to

the material. Loosen the screw 7 and

adjust the cylinder 6:

In direction A = higher pressure

In direction B = lower pressure.