Duerkopp Adler 510 Dönüştürme Talimatları - Sayfa 16
Dikiş Makinesi Duerkopp Adler 510 için çevrimiçi göz atın veya pdf Dönüştürme Talimatları indirin. Duerkopp Adler 510 16 sayfaları. Pneum. fabric clamp lifting
Sayfayı Yazdır
Umbauanleitung für Nähgutklammerlüftung, pneum.
Converting Instructions - Pneum. Fabric Clamp Lifting
4.
Setting the control unit
Maschine
Benutzer
Service
Freie Konturen
Memory-Dongle
Ausstattung
Handtast.:
E1.Fw.:
_/-Klamm.:
Laserl.:
F.Brenner:
Opt.Anyeige
Belegung Eing.
Ausgabe/Edition:
Änderungsindex
04.2008
Rev. index: 00.0
Bausatz 0510 590124 / Kit 0510 590124
–
Switch on the main switch.
The control unit is initialized.
The main menu appears
–
Press function key "F" while the main menu is displayed.
The menu for the code entry will appear.
–
Enter code number "25483" (Code 1).
After input of the correct code number, the display changes over
to the menu "Technician mode".
–
Select the submenu "machine" by using the keys "ñ" and "ò".
–
Switch to the selected submenu with the "OK" key.
–
Select the submenu "sewing equipment" by using the keys "ñ"
and "ò".
–
Switch to the selected submenu with the "OK" key.
–
Select the submenu "equipment" by using the keys "ñ" and "ò".
–
Switch to the selected submenu with the "OK" key.
8.5
8.5
–
Select the submenu "clamp" by using the keys "ñ" and "ò".
–
Switch to the selected submenu with the "OK" key.
Aus
–
Switch the clamp setting to "OFF".
Aus
EIN
Aus
Aus
Printed in Germany
Teile-Nr./ Part-No.:
0791 510771
Blatt:
16 von 16
Sheet: 16 from 16