ANZ POS MOVE Hızlı Referans Kılavuzu - Sayfa 3

Ödeme Terminali ANZ POS MOVE için çevrimiçi göz atın veya pdf Hızlı Referans Kılavuzu indirin. ANZ POS MOVE 4 sayfaları.
Ayrıca ANZ POS MOVE için: Hızlı Referans Kılavuzu (4 sayfalar)

Sayfayı Yazdır
ANZ POS MOVE Hızlı Referans Kılavuzu
MAIL / TELEPHONE ORDER TRANSACTIONS (MOTO)
Standalone
Press <ENTER> if the terminal is in 'sleep mode' to bring
up the idle screen
Key in sale amount and press <ENTER>
Key in cash out amount (if required) or press <ENTER>
Key in the Card Number and press <ENTER>
Key in the Expiry Date and press <ENTER>
Press <Clear> on the "CARD PRESENT?" screen
Key in the CCV and press <ENTER>
On the "MOTO TYPE?" screen, press <F2> (scroll down) or <F3> (scroll up) to select TELEPHONE ORDERS or
MAIL ORDER.
Transaction will be authorised, and a receipt will be printed.
SETTLEMENT
ANZ Worldline Payment Solutions offers same day settlement, every day.*
* For ANZ business account holders, funds are available on the same day for online transactions, processed through
the terminal and settled before 09:00 pm (Melbourne time). For non-ANZ business account holders, for online
transactions processed through the terminal, ANZ Worldline Payment Solutions will transfer the funds to the
merchant's bank on the following business day and the availability of the funds will be determined by the merchant's
bank. For transactions processed offline or via Paper Merchant Vouchers, these settlement times do not apply.
CHARGING THE TERMINAL BATTERY
1
Place the terminal on the base by securely connecting the terminal to the docking connector on the base.
2
The terminal should display
3
Connect the other end of base power supply to the main power outlet on the wall.
4
Check that the charging symbol
the terminal screen. This will indicate that the terminal is connected into the power outlet and amount of
charge held in the battery.
5
Ensure the charging cable is always plugged into the back of the base.
HOW TO LOAD PRINTER PAPER
A red line will appear on the paper, indicating that the paper roll must be replaced. To re-load a new roll:
1
Open the paper compartment by lifting the catch located at the rear of the terminal below the contactless
symbol and pull the cover towards the rear of the terminal.
2
Insert the paper roll (diameter 40mm) in the compartment.
3
Pull the paper up to the top of the terminal and hold in position.
4
Maintain the paper roll position and press the lid closed until it clips into position.
Note: Ensure paper roll is always loaded in the terminal for the terminal to function.
Integrated
Initiate the transaction via POS system until the EFTPOS
screen displays 'PRESENT CARD'
in the upper right corner of the terminal screen.
has been added to the power icon displayed on the upper right corner of
3