Duerkopp Adler 550-16-23 Kurulum Talimatları Kılavuzu - Sayfa 8

Dikiş Makinesi Duerkopp Adler 550-16-23 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Duerkopp Adler 550-16-23 8 sayfaları. Sewing lamp led
Ayrıca Duerkopp Adler 550-16-23 için: Montaj Talimatları (2 sayfalar)

Sayfayı Yazdır

Duerkopp Adler 550-16-23 Kurulum Talimatları Kılavuzu

Sewing Test

After the installation work, carry out a sewing test.

–

Insert the mains plug.

Caution Risk of Injury!

Switch off the main switch.

Switch off the sewing machine before threading the needle and the

hook thread.

–

Thread the reel thread (See Operating Instructions).

–

Switch on the main switch.

–

Arrest the sewing feet in raised position (See Operating

Instructions).

–

Fill up the reel at low speed.

–

Switch on the main switch .

–

Threading the needle and hook thread (See Operating

Instructions).

–

Select the material to be sewn.

–

Start the sewing test at low speed and increase the

speed continuously.

–

Check whether the seam meets the expectations.

If the expectations are not fulfilled change the thread tensions (See

Operating instructions).

If necessary, check and correct the settings

specified in the Service Instructions.