Addi-Data MSX-E3701-DIO Hızlı Kurulum - Sayfa 7

Ölçüm Cihazları Addi-Data MSX-E3701-DIO için çevrimiçi göz atın veya pdf Hızlı Kurulum indirin. Addi-Data MSX-E3701-DIO 8 sayfaları. Ethernet system for length measurement

Sayfayı Yazdır

The following actions are possible:

- IP Address: Change the IP address of the Ethernet system in order to adapt it to your

corporate network, for example.

- Web Interface: Access the web interface of your Ethernet system and change the

configuration.

- Save General Configuration: Save the general configuration of the Ethernet system

(including, for example, the network configuration), i.e. all the settings defined on the

web interface apart from the I/O configuration.

- Load General Configuration: Load a file containing the general configuration of the

Ethernet system.

- Save I/O Configuration: Save all function-specific settings defined on the web

interface under "I/O Configuration".

- Load I/O Configuration: Load a function-specific configuration.

- Transducer Database: Edit the user's transducer database, that is, for example, change

transducer features and add new transducers. The MSX-E database must contain the

transducers that will be connected to the Ethernet system in order for the system to

detect them.

- Firmware Update: Update the firmware of the Ethernet system. The required

firmware file is available on request. The file name corresponds to the firmware version.

- Transducer Calibration: Calibrate transducers connected to one or more channels.

- Transducer Diagnosis: Test transducers for errors (short-circuit, open load).

- Transducer Monitoring: Select the channels to be acquired and start the acquisition

with monitoring. For each channel, each acquired value is immediately displayed in a

diagram.

NOTICE!

Depending on the Ethernet system, a different number of buttons

and accordingly, different types of actions are available.