Duerkopp Adler 558 Kurulum Talimatları Kılavuzu - Sayfa 9

Dikiş Makinesi Duerkopp Adler 558 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Duerkopp Adler 558 14 sayfaları.

3. Electrical Connection

The nominal voltage listed on the motor rating plate and the mains voltage must be the

same !

For conversion to a different mains voltage the appropriate drive package must be

mounted.

The drive package consists of:

Motor 2, belt pulleys 1 + 4, V-belt and switch.

Order no.:

Nominal voltage:

- 2410591

3 ~ 400 V + N, 50 Hz

- 2410575

3 ~ 230 V, 60 Hz

- 2295482

3 ~ 230 V, 50 Hz

- 2410540

1 ~ 230 V, 50 Hz

- 2410478

1 ~ 230 V, 60 Hz

For conversion to a different mains voltage the following changes are to be made:

–

If changed from 3-phase to 2-phase or vice versa, the whole drive package must

be changed.

–

If changed from 50 Hz to 60 Hz or vice versa, only the belt pulley and the V-belt

must be replaced.

–

If changed from 3 ~ 400 V to 3 ~ 230 V or vice versa, the bridges in the motor

terminal box 3 must be switched in " Star " or " Delta ", appropriate to the mains

voltage !

The wiring is shown in the hook-up diagram.

ATTENTION !

All work on the electrical equipment of the buttonhole

machine may only be conducted by electricians or suitablly

instructed personnel.

The mains plug must be disconnected.