Duerkopp Adler 743-121 Kullanım Talimatları Kılavuzu - Sayfa 4
Dikiş Makinesi Duerkopp Adler 743-121 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Duerkopp Adler 743-121 14 sayfaları.
Ayrıca Duerkopp Adler 743-121 için: Kurulum Talimatları Kılavuzu (7 sayfalar)
Sayfayı Yazdır
1.3 Optional Equipment
2. Operating the Sewing Unit
2.1 Needles and Threads
2.2 Threading
6
0794 013222
Bundle clamp with swing arm and holder pipehr.
0794 000091
Supporting table (small).
(only in conjunction with the bundle clamp)
0794 000332
Remover device for smoothing the blown-out
sewing pieces.
(only in conjunction with the bundle clamp)
0794 013333
Blower pipe from the top or the right.
0794 013444
Supporting table
(when using in-house bundle clamp wagons)
0797 003031
Compressed air connection hose, connector
plug,
connector socket and hose clamp.
Needle system:
Needle thickness:
Threads:
Caution Risk of Injury !
Turn main switch off.
Upper and lower threads may only be threaded with the machine
switched off.
The configuration set must be in the left end position.
Threading lower thread (Bobbin thread)
–
Place thread spool 2 on the thread stand.
–
Alternatingly feed the thread through all 4 guide eyes of the take
off arm 1.
–
Unlock the slider bed and pull to the side.
–
Guide the thread through the thread tensioner 4 + 5 and the thread
guide 12.
–
Swing up the flap 13 over the thread take up disk. Guide the thread
to the right past the pins.
–
Lead the thread through the hook 14 and pull tight.
–
Close the flap 13 over the thread take up disk.
The thread must be in the flap slot.
–
Return the slider bed to its initial position.
Hereby the leaf spring must lock in place.
Threading the upper thread (Needle thread)
–
Place thread spool 3 on the thread stand.
–
Alternatingly guide the thread through all 4 guide eyes of the
takeoff arm 1.
–
Guide the thread through the thread tensioner 6 + 7, thread guide
9, check spring 10 and thread monitor 11.
–
Lead the thread through the needle and the thread clamp.
Cut of the excess at the thread trimmer.
934 SIN
Nm 90
As needle and bobbin thread spun
sewing threads