Addi-Data MSX-E1721 Hızlı Kurulum - Sayfa 2
Veri Kaydediciler Addi-Data MSX-E1721 için çevrimiçi göz atın veya pdf Hızlı Kurulum indirin. Addi-Data MSX-E1721 8 sayfaları. Ethernet multifunction counter system
Connecting the Ethernet system
- Please read the safety precautions (yellow leaflet) first!
- Afterwards, connect your Ethernet system as follows:
A) Connect the Ethernet system to your PC or network using an Ethernet cable
(e.g. CMX-60).
B) Connect the desired functions.
C) Optional: Connect the cable for trigger/synchro signals (e.g. CMX-40) to the Ethernet
system.
NOTICE!
Please ensure that the default IP address of the Ethernet system
(192.168.99.99) is not assigned to another system on your network yet.
Starting the Ethernet system
D) Connect the Ethernet system to the power source using a power supply cable
(e.g. CMX-20).
E) Check the status of the Ethernet system by means of the LED display:
Power On:
Port 0 ACT/Link: - flashes yellow
Port 1 ACT/Link: - flashes yellow
Status:
As soon as the "Status" LED lights green, you can install the software (see page 6).
(A)
Ethernet
ports
(C)
Trigger/
Synchro
(D)
Power
supply
2
- lights green
- lights green
- lights yellow
- lights/flashes red
(E) LED display
Counter
CH0
Digital I/O
System
CH8
Counter 0
CMX-20: Power supply cable
= Power supply is OK
= Ethernet cable is connected to Port 0
= Ethernet cable is connected to Port 1
= Ethernet system is ready for operation
= Ethernet system is booting
= Error while booting
(B) Digital I/O (0 to 15)
CH1
CH2
CH3
CH9
CH10
CH11
CH12
Counter 1
(B) Incremental counter inputs (0 to 3)
CH4
CH5
CH6
CH7
CH13
CH14
CH15
Counter 2
Counter 3
www.addi-data.com