Duerkopp Adler 911 Montaj Talimatları Kılavuzu - Sayfa 15

Dikiş Makinesi Duerkopp Adler 911 için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Duerkopp Adler 911 20 sayfaları. Laser lamp
Ayrıca Duerkopp Adler 911 için: Montaj Talimatları Kılavuzu (16 sayfalar), Montaj Talimatları Kılavuzu (8 sayfalar), Montaj Talimatları Kılavuzu (16 sayfalar)

Fitting Instruction for Remaining Thread Monitor

2.3 Pre-assembling, connecting and attaching the control

Ausgabe/Edition:

Änderungsindex

03.2011

Rev. index: 00.0

Anbauanleitung Restfadenwächter

Teilesatz 0911 597754

Kit 0911 597754

–

Insert the spacers 1 (4x) into the bores of the residual thread

monitor carrier and attach the PCB 2.

–

Connect the cables onto the residual thread monitor PCB:

–

Plug connector X623 (from the cable harness or cable 9870

911017) to position 3; plug connector X621 of the light

barrier cable to position 4.

–

Attach the cables with the cable clips 5 to the residual

thread monitor carrier.

–

Screw the residual thread monitor carrier with PCB onto

the right console by using two M3 screws 6.

Printed in Germany

Teile-Nr./ Part-No.:

0791 911703

Blatt:

von

Sheet: 15 from 20