Abtus ABT 8000 Kullanım Kılavuzu - Sayfa 8

Ölçüm Cihazları Abtus ABT 8000 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Abtus ABT 8000 16 sayfaları. Data logging laser height & stagger gauge

Sayfayı Yazdır
Abtus ABT 8000 Kullanım Kılavuzu
4.5
Measuring Cant/ Super Elevation & Track Gauge
1.
The Cant / SE and Track Gauge are measured automatically when an OHL stagger
measurement is made following the instructions in Section 4.4. The measurements will
appear on the screen of the DLHS gauge.
A positive SE reading is when the right rail is higher than the left.
4.6
Measuring REFOS
1.
Secure the REFOS laser unit supplied with the DLHS carefully to the connector slots on
either foot of the gauge. The laser unit is powered by the DLHS batteries. (See Figure 3).
2.
Use the spirit level on the laser unit to ensure it is level after placing the gauge in a position
to take the reading.
Figure 6 – Stagger adjustment
8