Duerkopp Adler 911 Montaj Talimatları Kılavuzu - Sayfa 9
Aksesuarlar Duerkopp Adler 911 için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Duerkopp Adler 911 16 sayfaları. Laser lamp
Ayrıca Duerkopp Adler 911 için: Montaj Talimatları Kılavuzu (20 sayfalar), Montaj Talimatları Kılavuzu (16 sayfalar), Montaj Talimatları Kılavuzu (8 sayfalar)
Sayfayı Yazdır
1
Kit Components
Quantity
Material-No.
1
0510 491010
1
0911 490240
3
9202 002487
1
0911 490260
2
9203 313697
2
0739 005010
4
9202 002087
4
9231 110057
4
9830 501010
1
9870 911015
6
9840 121002
2
Additionally needed kits
2.1
Laser lamp with power supply unit (Material-No. 0911 597534)
Quantity
Material-No.
1
9835 501004
1
0806 402670
1
0806 402680
3
0216 000103
1
9850 001090
4
9830 501010
2
9840 121001
Ausgabe/Edition:
Änderungsindex
05.2010
Rev. index: 00.0
Anbauanleitung für Laserleuchte
Teilesatz 0911 597524
Fitting Instruction for laser lamp
Kit 0911 597524
The kit consists of the following components:
Designation
Bow (10mm Round steel bent 90°)
L-bracket
Cylinder head screw M5 x 12 (2x L-bracket on face cover,
1x bow on L-bracket)
Plate (for the PCBs)
Countersunk screw M4 x 16 (Fixation of the plate instead
of the PCB)
Sleeve (Fixation of the board instead of the PCB)
Cylinder head screw M4 x 12 (additional support for the plate)
Hexagonal nut M4 (additional support for the board)
Distance piece, PA4.8 (for the small PCB that is repositioned
on the plate)
Cable
Cable tie 200 x 2.5
This kit must be ordered at least 1x up to max. 4 times.
The kit consists of the following components:
Designation
Laser complete
Clamp (on bow 0510 491010)
Clamp (in clamp 0806 402670)
Hexagonal nut M10 x 1 (1x lock clamp 1 on bow;
1x lock clamp 2 on clamp 1; 1x lock laser
on clamp 2)
PCB complete, Laser power supply unit
Distance piece, PA4.8
Cable tie 200 x 2.5
Printed in Germany
Teile-Nr./ Part-No.:
0791 911701
Blatt:
von
Sheet: 9 from 16