Abtus ABT5200 Kullanım Kılavuzu - Sayfa 3

Ölçüm Cihazları Abtus ABT5200 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Abtus ABT5200 8 sayfaları. Sidecut gauge

4.0 Getting Started

When picking a measurement point, it is important to consider the

following points as they can cause an inaccuracy;



Location of welds or branding marks.



Excess loose rust, dirt and grease.

Once a suitable measuring position has been chosen, the gauge can

be attached to the rails. The gauge has 2 locating magnets, as shown

in Figure 1, which will allow it to stay connected to the rail; leaving the

user's hands free to take the measurements.

Figure 1

5200-1 Issue 04